General Performance Indicator |
Product Name |
20 Port Gigabit Managed POE Switch |
Product Model |
HR-AFGM–1622S |
Interface |
16*10/100/1000M PoE Ports + 2*10/100/1000M Ethernet Uplink Ports + 2*Gigabit SFP Uplink Ports + 1*Console Port |
Network Protocols |
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3x
IEEE 802.3z
IEEE 802.1q
IEEE 802.1p |
PoE Parameters |
PoE Standard: IEEE802.3at (30W) and IEEE802.3af (15.4w) |
PoE compatibility: IEEE 802.3af/at adaptive |
POE port output: DC52V |
Power Pin Assignment: Power over spare pairs 1/2(+) and 3/6 (-) |
Port Lightning Protection |
General Mode 6KV, Differential Mode 4KV, ESD 15KV. |
Network Transmission Medium |
10BASE-T: Cat3, 4, 5 UTP (≤ 100 m)
100BASE-TX: UTP (≤100 m) above Cat5
1000BASE-TX: UTP (≤100 m) above Cat5 |
Optical |
Multimode fiber: 1310nm, 2Km
Single mode fiber: 1310nm, 20/40 Km
1550nm, 60/80/100/120Km |
Reset |
Short press restart, long press 5 seconds to restore factory Settings |
DIP Function |
VLAN: 1–16 ports are isolated from each other, and the PoE Watchdog function is open (hardware takes precedence over software). |
Default: all ports can communicate with each other, PoE Watchdog is closed |
Extend: 13–16 Port: Supports 250m link extension at a rate of 10M, other ports normal, PoE Watchdog open (hardware takes precedence over software). |
LED Indicator |
|
PWR |
Lighting:Powered
Un–Light:No Power |
|
|
|
SYS |
Flashing: System Start–up
Lighting: System Running |
|
|
SW |
Lighting: LVAN Un–Light: Extend
Flashing: Default |
|
|
POE/ACT |
Lighting:Powered
Un–Light:No Power |
|
|
Link/ACT |
Lighting: Link connection
Flashing: Data transmission
Un–Light: Link disconnect |
|
|
Power Supply |
Machine input voltage: AC110–264V; Output: DC52V5.76A, Total power: 300W |
|
Physical Dimension |
Product size (L×W×H): 410mm×185mm×44.5mm
Package size (L×W×H): 468mm×274mm×81mm
Product weight: 2.3kg
Package weight: 2.9 kg |
|
Working Environment |
Operating Temperature:–20° ~ 55 ° C; Storage Temperature: –40 ° ~ 85 ° C;
Operating Humidity: 10% ~ 95%, non–condensing
Working height: up to 10,000 feet (3,000 meters) Storage height: up to 10,000 feet (3,000 meters) |
|
Certification |
CE, FCC,ROHS,3C |
|
MTBF |
100,000 hours |
|
Package Contents |
1. Switch: 1 set
2. Instruction manual: 1
3. Certificate of conformity: 1
4. Warranty card: 1
5. AC power cord 1
6. A pair of hanging ears |
|
Warranty |
3 years warranty |
|
Technical Indicators |
|
Bandwidth |
40Gbps (non–blocking) |
|
Packet Forwarding rate |
29.76Mpps |
|
Packet Buffer Memory |
4M |
|
Memory Capacity |
128MB |
|
Flash Capacity |
16MB |
|
Jumbo frame |
9.6Kbytes |
|
VLANs |
4096 |
|
MAC |
8K |
|
Forwarding Mode |
Store-And–Forward |
|
Layer 2 Software Function |
|
Port Management |
Enable/Disable Port |
|
Speed、Duplex、MTU Setting |
|
Flow–control |
|
Port Information Check |
|
Port Mirroring |
Supports both side–way port mirroring |
|
Port Speed Limit |
Supports port–based input / output bandwidth management |
|
Port Isolation |
Support the downlink port isolation, and can communicate with the uplink port |
|
Storm Suppression |
Supports unknown unicast, multicast, unknown multicast, broadcast type storm suppression
Storm suppression based on bandwidth regulation and storm filtering |
|
Link Aggregation |
Support static manual aggregation
Support LACP dynamic aggregation |
|
VLAN |
Access |
|
Trunk |
|
Hybrid |
|
Support port, protocol, MAC-based VLAN partitioning |
|
Support GVRP dynamic VLAN registration |
|
Voice VLAN |
|
MAC |
Support static addition, deletion |
|
MAC address learning limit |
|
Support dynamic aging time setting |
|
Spanning tree |
Support STP spanning tree protocol
Supports RSTP Rapid Spanning Tree Protocol
Supports MSTP Rapid Spanning Tree Protocol |
|
Multicast |
Support static addition, deletion
IGMP-snooping |
|
Support MLD-Snooping |
|
Support v1/2/3 dynamic multicast monitor |
|
DDM |
Support SFP/SFP+DDM |
|
Extended Function |
|
ACL |
Based on source MAC, destination MAC, protocol type, source IP, destination
IP, L4 port |
|
Qos |
Based on 802.1p (COS) classification |
|
Based on DSCP classification |
|
Classification based on source IP, destination IP, and port number |
|
Support SP, WRR scheduling strategy |
|
Support flow rate limit CAR |
|
LLDP |
Support LLDP link discovery protocol |
|
User settings |
Add/delete users |
|
Log |
User login, operation, status, events |
|
Anti–attack |
DOS defense |
|
Support CPU protection and limits the rate of sending cpu packets |
|
ARP binding (IP, MAC, PORT binding) |
|
Certification |
Support 802.1x port authentication |
|
Support AAA certification |
|
Network diagnosis |
Support ping、telnet、trace |
|
System Management |
Device reset, configuration save/restore, upgrade management, time setting, etc. |
|
Management function |
|
CLI |
Support serial port command line management |
|
SSH |
Support SSHv1/2 remote management |
|
TELNET |
Support telnet remote management |
|
WEB |
Support Layer 2 settings, Layer 2 and Layer 3 monitor |
|
SNMP |
SNMP V1/V2/V3 |
|
Support trap:ColdStart、WarmStart、LinkDown、LinkUp |
|
RMON |
Support RMON v1 |
|
POE |
Support PoE power supply |
|
Other functions |
Support DHCP Snooping、Option82 |
|
Support dynamic ARP detection |
|
Support TACACS+ certification |
|
Support DNS certification |
|
Support port security settings |
|
Support MVR protocol |
|
Support cable detection VCT function |
|
Support UDLD protocol |
|